How to maintain the shower
Time : 2021-4-21 12:00:00 Hits : 3220
1. Basin faucet and kitchen faucet have small water output and no foaming
Possible cause: too low water pressure makes the bubbler unable to produce bubbles
Solution: remove the tap and replace it with a new bubbler
2. Water leakage at the connection between hose and tap
Possible causes: improper installation, deformation of rubber ring, uneven or too thin outlet pipe joint, or mismatch between hose and tap.
Solution: select the appropriate hose and faucet according to the specification, replace the rubber ring and re install.
3. The water temperature is low
Possible causes: insufficient power of water heater, temperature not adjusted in place
Solution: adjust the temperature control button or buy a water heater with large water output
Shower maintenance skills
1. Ask experienced professionals for construction and installation. During installation, the shower should not collide with hard objects as far as possible, and do not leave cement and other residues on the surface, so as not to damage the surface coating luster. Special attention should be paid to the removal of debris in the pipe before installation, otherwise the sprinkler will be blocked by debris in the pipe, thus affecting the use.
2. Under the condition that the water pressure is not less than 0.02MPa (i.e. 0.2kgf / cm3), after a period of use, if it is found that the water output is reduced, or even the water heater is flameout, the screen cover can be gently unscrewed at the water outlet of the shower to remove the impurities, which can generally recover as before. But remember not to forcibly dismantle the shower, because the internal structure of the shower is complex, non professional forcible dismantling will lead to the shower can not restore the original.
3. Don't use too much force when opening and closing the shower faucet and adjusting the water outlet mode of the shower, just turn it gently. Even if it is a traditional faucet, it doesn't take much effort. Special attention should be paid not to use the handle of the faucet and shower stand as handrails.
4. The metal hose of the shower head of the bathtub should be kept in a natural stretching state. Do not coil it on the faucet when not in use. At the same time, pay attention to the joint between the hose and the faucet, so as to avoid breaking or damaging the hose.
Possible cause: too low water pressure makes the bubbler unable to produce bubbles
Solution: remove the tap and replace it with a new bubbler
2. Water leakage at the connection between hose and tap
Possible causes: improper installation, deformation of rubber ring, uneven or too thin outlet pipe joint, or mismatch between hose and tap.
Solution: select the appropriate hose and faucet according to the specification, replace the rubber ring and re install.
3. The water temperature is low
Possible causes: insufficient power of water heater, temperature not adjusted in place
Solution: adjust the temperature control button or buy a water heater with large water output
Shower maintenance skills
1. Ask experienced professionals for construction and installation. During installation, the shower should not collide with hard objects as far as possible, and do not leave cement and other residues on the surface, so as not to damage the surface coating luster. Special attention should be paid to the removal of debris in the pipe before installation, otherwise the sprinkler will be blocked by debris in the pipe, thus affecting the use.
2. Under the condition that the water pressure is not less than 0.02MPa (i.e. 0.2kgf / cm3), after a period of use, if it is found that the water output is reduced, or even the water heater is flameout, the screen cover can be gently unscrewed at the water outlet of the shower to remove the impurities, which can generally recover as before. But remember not to forcibly dismantle the shower, because the internal structure of the shower is complex, non professional forcible dismantling will lead to the shower can not restore the original.
3. Don't use too much force when opening and closing the shower faucet and adjusting the water outlet mode of the shower, just turn it gently. Even if it is a traditional faucet, it doesn't take much effort. Special attention should be paid not to use the handle of the faucet and shower stand as handrails.
4. The metal hose of the shower head of the bathtub should be kept in a natural stretching state. Do not coil it on the faucet when not in use. At the same time, pay attention to the joint between the hose and the faucet, so as to avoid breaking or damaging the hose.
